H-85             PF-80   w-414     

Type: 1-inch large-diaphragm pressure gradient microphone

Polar patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight

Sensitivity: 23 mV/Pa (-33 dBV) ? 0.5 dB

Frequency range: 20 to 20,000 Hz (see frequency response traces)

Electrical impedance: ? 200 ohms

Recommended load impedance: ? 2,200 ohms

Bass cut filter slope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz

Preattenuation pads: -6 dB, -12 dB, -18 dB, switchable

Equivalent noise level (CCIR 468-2): 20 dB (0 dB preattenuation)

Equivalent noise level (DIN 45 412, A-weighted): 6 dB-A (0 dB preattenuation)

Signal-to-noise ratio re 1 Pa (A-weighted): 88 dB

Maximum SPL for 0.5% THD: 200/400/800/1600 Pa = 140/146/152/158 dB SPL (0/-6/-12/-18 dB)

Dynamic range: 134 dB minimum

Environment: Temperature range: -10? C to +60? C (14? F to 140? F)

Relative humidity: 95% (+20? C/68? F), 85% (+60? C/140? F)

Powering: 48 V phantom power to DIN/IEC

Current consumption: approximately 4.5 mA

Connector: 3-pin XLR to IEC

Dimensions: 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)

Net weight: 300 g (10.6 oz.)